Parents (Total: 9)

The searched file hash is included in 9 parent files which include package known and seen by metalookup. A sample is included below:

Key	Value
MD5	C2EC5143DC44A5EDC404C6B6CB3BEF90
PackageArch	x86_64
PackageDescription	This module implements the Rijndael cipher, which has just been selected as the Advanced Encryption Standard. * keysize Returns the keysize, which is 32 (bytes). The Rijndael cipher actually supports keylengths of 16, 24 or 32 bytes, but there is no way to communicate this to 'Crypt::CBC'. * blocksize The blocksize for Rijndael is 16 bytes (128 bits), although the algorithm actually supports any blocksize that is any multiple of our bytes. 128 bits, is however, the AES-specified block size, so this is all we support. * $cipher = Crypt::Rijndael->new( $key [, $mode] ) Create a new 'Crypt::Rijndael' cipher object with the given key (which must be 128, 192 or 256 bits long). The additional '$mode' argument is the encryption mode, either 'MODE_ECB' (electronic codebook mode, the default), 'MODE_CBC' (cipher block chaining, the same that 'Crypt::CBC' does), 'MODE_CFB' (128-bit cipher feedback), 'MODE_OFB' (128-bit output feedback), or 'MODE_CTR' (counter mode). ECB mode is very insecure (read a book on cryptography if you don't know why!), so you should probably use CBC mode. * $cipher->set_iv($iv) This allows you to change the initial value vector used by the chaining modes. It is not relevant for ECB mode. * $cipher->encrypt($data) Encrypt data. The size of '$data' must be a multiple of 'blocksize' (16 bytes), otherwise this function will croak. Apart from that, it can be of (almost) any length. * $cipher->decrypt($data) Decrypts '$data'.
PackageName	perl-Crypt-Rijndael
PackageRelease	41.3
PackageVersion	1.16
SHA-1	248C6DAC5A07A8C267C182027F7B81F87387F5B3
SHA-256	A7C04655E03C9A0D3D1DAA2E8083A496B419A244F2E9AEBE139B826CB28A4D07

Key	Value
MD5	AF59A6DA2BC475378797623776015534
PackageArch	x86_64
PackageDescription	This module implements the Rijndael cipher, which has just been selected as the Advanced Encryption Standard. * keysize Returns the keysize, which is 32 (bytes). The Rijndael cipher actually supports keylengths of 16, 24 or 32 bytes, but there is no way to communicate this to 'Crypt::CBC'. * blocksize The blocksize for Rijndael is 16 bytes (128 bits), although the algorithm actually supports any blocksize that is any multiple of our bytes. 128 bits, is however, the AES-specified block size, so this is all we support. * $cipher = Crypt::Rijndael->new( $key [, $mode] ) Create a new 'Crypt::Rijndael' cipher object with the given key (which must be 128, 192 or 256 bits long). The additional '$mode' argument is the encryption mode, either 'MODE_ECB' (electronic codebook mode, the default), 'MODE_CBC' (cipher block chaining, the same that 'Crypt::CBC' does), 'MODE_CFB' (128-bit cipher feedback), 'MODE_OFB' (128-bit output feedback), or 'MODE_CTR' (counter mode). ECB mode is very insecure (read a book on cryptography if you don't know why!), so you should probably use CBC mode. * $cipher->set_iv($iv) This allows you to change the initial value vector used by the chaining modes. It is not relevant for ECB mode. * $cipher->encrypt($data) Encrypt data. The size of '$data' must be a multiple of 'blocksize' (16 bytes), otherwise this function will croak. Apart from that, it can be of (almost) any length. * $cipher->decrypt($data) Decrypts '$data'.
PackageName	perl-Crypt-Rijndael
PackageRelease	41.3
PackageVersion	1.16
SHA-1	7FED3B0F021026FE670B807003044A0B0538B621
SHA-256	2A6869D57241117550305E0CD4FAB3A25F0D3A693CE83DB262FA452A8EB131B8

Key	Value
MD5	B4DC3C0D61C653F0DE4EE2BDB0037D59
PackageArch	x86_64
PackageDescription	This module implements the Rijndael cipher, which has just been selected as the Advanced Encryption Standard. * keysize Returns the keysize, which is 32 (bytes). The Rijndael cipher actually supports keylengths of 16, 24 or 32 bytes, but there is no way to communicate this to 'Crypt::CBC'. * blocksize The blocksize for Rijndael is 16 bytes (128 bits), although the algorithm actually supports any blocksize that is any multiple of our bytes. 128 bits, is however, the AES-specified block size, so this is all we support. * $cipher = Crypt::Rijndael->new( $key [, $mode] ) Create a new 'Crypt::Rijndael' cipher object with the given key (which must be 128, 192 or 256 bits long). The additional '$mode' argument is the encryption mode, either 'MODE_ECB' (electronic codebook mode, the default), 'MODE_CBC' (cipher block chaining, the same that 'Crypt::CBC' does), 'MODE_CFB' (128-bit cipher feedback), 'MODE_OFB' (128-bit output feedback), or 'MODE_CTR' (counter mode). ECB mode is very insecure (read a book on cryptography if you don't know why!), so you should probably use CBC mode. * $cipher->set_iv($iv) This allows you to change the initial value vector used by the chaining modes. It is not relevant for ECB mode. * $cipher->encrypt($data) Encrypt data. The size of '$data' must be a multiple of 'blocksize' (16 bytes), otherwise this function will croak. Apart from that, it can be of (almost) any length. * $cipher->decrypt($data) Decrypts '$data'.
PackageName	perl-Crypt-Rijndael
PackageRelease	40.1
PackageVersion	1.16
SHA-1	9747AE9962ADDEB2C1E82ABDCFAD64C94B341771
SHA-256	979864B6167AFC91A4449B78E106A40E6C05BBE56B91EDBEFDBA42653C32725C

Key	Value
MD5	FE7C005757BF73D2381FCA3A899975A3
PackageArch	x86_64
PackageDescription	This module implements the Rijndael cipher, which has just been selected as the Advanced Encryption Standard. * keysize Returns the keysize, which is 32 (bytes). The Rijndael cipher actually supports keylengths of 16, 24 or 32 bytes, but there is no way to communicate this to 'Crypt::CBC'. * blocksize The blocksize for Rijndael is 16 bytes (128 bits), although the algorithm actually supports any blocksize that is any multiple of our bytes. 128 bits, is however, the AES-specified block size, so this is all we support. * $cipher = Crypt::Rijndael->new( $key [, $mode] ) Create a new 'Crypt::Rijndael' cipher object with the given key (which must be 128, 192 or 256 bits long). The additional '$mode' argument is the encryption mode, either 'MODE_ECB' (electronic codebook mode, the default), 'MODE_CBC' (cipher block chaining, the same that 'Crypt::CBC' does), 'MODE_CFB' (128-bit cipher feedback), 'MODE_OFB' (128-bit output feedback), or 'MODE_CTR' (counter mode). ECB mode is very insecure (read a book on cryptography if you don't know why!), so you should probably use CBC mode. * $cipher->set_iv($iv) This allows you to change the initial value vector used by the chaining modes. It is not relevant for ECB mode. * $cipher->encrypt($data) Encrypt data. The size of '$data' must be a multiple of 'blocksize' (16 bytes), otherwise this function will croak. Apart from that, it can be of (almost) any length. * $cipher->decrypt($data) Decrypts '$data'.
PackageName	perl-Crypt-Rijndael
PackageRelease	lp152.40.1
PackageVersion	1.16
SHA-1	689A3BC85103D151EE68406BF14F1AF801F1E8DF
SHA-256	602B6979282BDA94C0390ACF8E0731606EB54305A8499E86740081355E1DE623

Key	Value
MD5	83FD89D9D0C9223255829ED4F96E77ED
PackageArch	x86_64
PackageDescription	This module implements the Rijndael cipher, which has just been selected as the Advanced Encryption Standard. * keysize Returns the keysize, which is 32 (bytes). The Rijndael cipher actually supports keylengths of 16, 24 or 32 bytes, but there is no way to communicate this to 'Crypt::CBC'. * blocksize The blocksize for Rijndael is 16 bytes (128 bits), although the algorithm actually supports any blocksize that is any multiple of our bytes. 128 bits, is however, the AES-specified block size, so this is all we support. * $cipher = Crypt::Rijndael->new( $key [, $mode] ) Create a new 'Crypt::Rijndael' cipher object with the given key (which must be 128, 192 or 256 bits long). The additional '$mode' argument is the encryption mode, either 'MODE_ECB' (electronic codebook mode, the default), 'MODE_CBC' (cipher block chaining, the same that 'Crypt::CBC' does), 'MODE_CFB' (128-bit cipher feedback), 'MODE_OFB' (128-bit output feedback), or 'MODE_CTR' (counter mode). ECB mode is very insecure (read a book on cryptography if you don't know why!), so you should probably use CBC mode. * $cipher->set_iv($iv) This allows you to change the initial value vector used by the chaining modes. It is not relevant for ECB mode. * $cipher->encrypt($data) Encrypt data. The size of '$data' must be a multiple of 'blocksize' (16 bytes), otherwise this function will croak. Apart from that, it can be of (almost) any length. * $cipher->decrypt($data) Decrypts '$data'.
PackageName	perl-Crypt-Rijndael
PackageRelease	lp153.41.1
PackageVersion	1.16
SHA-1	BFF0C854D540B4B15769B0935628AC9AD87BB744
SHA-256	FA942153C2482C683FDB283BB0D2BABF804742044C5FEAB006E5957A69410CB5

Key	Value
MD5	EA7E1E5FF38BB938F0AA71E3D4F0EF0D
PackageArch	x86_64
PackageDescription	This module implements the Rijndael cipher, which has just been selected as the Advanced Encryption Standard. * keysize Returns the keysize, which is 32 (bytes). The Rijndael cipher actually supports keylengths of 16, 24 or 32 bytes, but there is no way to communicate this to 'Crypt::CBC'. * blocksize The blocksize for Rijndael is 16 bytes (128 bits), although the algorithm actually supports any blocksize that is any multiple of our bytes. 128 bits, is however, the AES-specified block size, so this is all we support. * $cipher = Crypt::Rijndael->new( $key [, $mode] ) Create a new 'Crypt::Rijndael' cipher object with the given key (which must be 128, 192 or 256 bits long). The additional '$mode' argument is the encryption mode, either 'MODE_ECB' (electronic codebook mode, the default), 'MODE_CBC' (cipher block chaining, the same that 'Crypt::CBC' does), 'MODE_CFB' (128-bit cipher feedback), 'MODE_OFB' (128-bit output feedback), or 'MODE_CTR' (counter mode). ECB mode is very insecure (read a book on cryptography if you don't know why!), so you should probably use CBC mode. * $cipher->set_iv($iv) This allows you to change the initial value vector used by the chaining modes. It is not relevant for ECB mode. * $cipher->encrypt($data) Encrypt data. The size of '$data' must be a multiple of 'blocksize' (16 bytes), otherwise this function will croak. Apart from that, it can be of (almost) any length. * $cipher->decrypt($data) Decrypts '$data'.
PackageName	perl-Crypt-Rijndael
PackageRelease	lp151.40.1
PackageVersion	1.16
SHA-1	7E6943C7F70A66889BBACDF1C093F61F80D46B47
SHA-256	3F549394C3B3EFD8C843FC0AA303E76CF140EAE62DDBCAD77437CB3E8FFA9080

Key	Value
MD5	9D84CB0C989C861032E0E431E01C7070
PackageArch	x86_64
PackageDescription	This module implements the Rijndael cipher, which has just been selected as the Advanced Encryption Standard. * keysize Returns the keysize, which is 32 (bytes). The Rijndael cipher actually supports keylengths of 16, 24 or 32 bytes, but there is no way to communicate this to 'Crypt::CBC'. * blocksize The blocksize for Rijndael is 16 bytes (128 bits), although the algorithm actually supports any blocksize that is any multiple of our bytes. 128 bits, is however, the AES-specified block size, so this is all we support. * $cipher = Crypt::Rijndael->new( $key [, $mode] ) Create a new 'Crypt::Rijndael' cipher object with the given key (which must be 128, 192 or 256 bits long). The additional '$mode' argument is the encryption mode, either 'MODE_ECB' (electronic codebook mode, the default), 'MODE_CBC' (cipher block chaining, the same that 'Crypt::CBC' does), 'MODE_CFB' (128-bit cipher feedback), 'MODE_OFB' (128-bit output feedback), or 'MODE_CTR' (counter mode). ECB mode is very insecure (read a book on cryptography if you don't know why!), so you should probably use CBC mode. * $cipher->set_iv($iv) This allows you to change the initial value vector used by the chaining modes. It is not relevant for ECB mode. * $cipher->encrypt($data) Encrypt data. The size of '$data' must be a multiple of 'blocksize' (16 bytes), otherwise this function will croak. Apart from that, it can be of (almost) any length. * $cipher->decrypt($data) Decrypts '$data'.
PackageName	perl-Crypt-Rijndael
PackageRelease	40.1
PackageVersion	1.16
SHA-1	C660BAFF392D268B21365BECA3F89FEAEE191061
SHA-256	123E0006F0981C526FD087B0C0D7504ED2C53E65216F0166506212888E8C01AD

Key	Value
MD5	A1355208DE2E074F58C042E2F3828156
PackageArch	x86_64
PackageDescription	This module implements the Rijndael cipher, which has just been selected as the Advanced Encryption Standard. * keysize Returns the keysize, which is 32 (bytes). The Rijndael cipher actually supports keylengths of 16, 24 or 32 bytes, but there is no way to communicate this to 'Crypt::CBC'. * blocksize The blocksize for Rijndael is 16 bytes (128 bits), although the algorithm actually supports any blocksize that is any multiple of our bytes. 128 bits, is however, the AES-specified block size, so this is all we support. * $cipher = Crypt::Rijndael->new( $key [, $mode] ) Create a new 'Crypt::Rijndael' cipher object with the given key (which must be 128, 192 or 256 bits long). The additional '$mode' argument is the encryption mode, either 'MODE_ECB' (electronic codebook mode, the default), 'MODE_CBC' (cipher block chaining, the same that 'Crypt::CBC' does), 'MODE_CFB' (128-bit cipher feedback), 'MODE_OFB' (128-bit output feedback), or 'MODE_CTR' (counter mode). ECB mode is very insecure (read a book on cryptography if you don't know why!), so you should probably use CBC mode. * $cipher->set_iv($iv) This allows you to change the initial value vector used by the chaining modes. It is not relevant for ECB mode. * $cipher->encrypt($data) Encrypt data. The size of '$data' must be a multiple of 'blocksize' (16 bytes), otherwise this function will croak. Apart from that, it can be of (almost) any length. * $cipher->decrypt($data) Decrypts '$data'.
PackageName	perl-Crypt-Rijndael
PackageRelease	lp150.40.1
PackageVersion	1.16
SHA-1	A9B4BE2B50635EBBB96DA902F2F67C8794DB3D4D
SHA-256	4564A62D12C3E23218E94D5C5DB71365B376683F93CD28E23BEE30772C92674E

Key	Value
MD5	88996B33FB5F4A8D102995F86740769D
PackageArch	x86_64
PackageDescription	This module implements the Rijndael cipher, which has just been selected as the Advanced Encryption Standard. * keysize Returns the keysize, which is 32 (bytes). The Rijndael cipher actually supports keylengths of 16, 24 or 32 bytes, but there is no way to communicate this to 'Crypt::CBC'. * blocksize The blocksize for Rijndael is 16 bytes (128 bits), although the algorithm actually supports any blocksize that is any multiple of our bytes. 128 bits, is however, the AES-specified block size, so this is all we support. * $cipher = Crypt::Rijndael->new( $key [, $mode] ) Create a new 'Crypt::Rijndael' cipher object with the given key (which must be 128, 192 or 256 bits long). The additional '$mode' argument is the encryption mode, either 'MODE_ECB' (electronic codebook mode, the default), 'MODE_CBC' (cipher block chaining, the same that 'Crypt::CBC' does), 'MODE_CFB' (128-bit cipher feedback), 'MODE_OFB' (128-bit output feedback), or 'MODE_CTR' (counter mode). ECB mode is very insecure (read a book on cryptography if you don't know why!), so you should probably use CBC mode. * $cipher->set_iv($iv) This allows you to change the initial value vector used by the chaining modes. It is not relevant for ECB mode. * $cipher->encrypt($data) Encrypt data. The size of '$data' must be a multiple of 'blocksize' (16 bytes), otherwise this function will croak. Apart from that, it can be of (almost) any length. * $cipher->decrypt($data) Decrypts '$data'.
PackageName	perl-Crypt-Rijndael
PackageRelease	40.1
PackageVersion	1.16
SHA-1	4FF4D8D5BAF6C7AAE00574DB22F0F2D959341438
SHA-256	A6E24E6A533B95624D30B7E850ADB3211F43D522FEF3BB0C3873F324B21A4273