Parents (Total: 20)

The searched file hash is included in 20 parent files which include package known and seen by metalookup. A sample is included below:

Key	Value
MD5	AEB638F0CBBCA761EBB60FD285D40A64
PackageArch	i586
PackageDescription	This module implements the Rijndael cipher, which has just been selected as the Advanced Encryption Standard. * keysize Returns the keysize, which is 32 (bytes). The Rijndael cipher actually supports keylengths of 16, 24 or 32 bytes, but there is no way to communicate this to 'Crypt::CBC'. * blocksize The blocksize for Rijndael is 16 bytes (128 bits), although the algorithm actually supports any blocksize that is any multiple of our bytes. 128 bits, is however, the AES-specified block size, so this is all we support. * $cipher = Crypt::Rijndael->new( $key [, $mode] ) Create a new 'Crypt::Rijndael' cipher object with the given key (which must be 128, 192 or 256 bits long). The additional '$mode' argument is the encryption mode, either 'MODE_ECB' (electronic codebook mode, the default), 'MODE_CBC' (cipher block chaining, the same that 'Crypt::CBC' does), 'MODE_CFB' (128-bit cipher feedback), 'MODE_OFB' (128-bit output feedback), or 'MODE_CTR' (counter mode). ECB mode is very insecure (read a book on cryptography if you don't know why!), so you should probably use CBC mode. * $cipher->set_iv($iv) This allows you to change the initial value vector used by the chaining modes. It is not relevant for ECB mode. * $cipher->encrypt($data) Encrypt data. The size of '$data' must be a multiple of 'blocksize' (16 bytes), otherwise this function will croak. Apart from that, it can be of (almost) any length. * $cipher->decrypt($data) Decrypts '$data'.
PackageName	perl-Crypt-Rijndael
PackageRelease	41.28
PackageVersion	1.16
SHA-1	1538603776BDD587CA38C16AF7EE717C27E68A2B
SHA-256	85B7E70F855C6A6772DF3BDFED8F02632F83DAD235F9C5EC0EE48C87A94D30DB

Key	Value
MD5	1B20BB7EC643F10B47631210E4D2B0FB
PackageArch	x86_64
PackageDescription	This module implements the Rijndael cipher, which has just been selected as the Advanced Encryption Standard. * keysize Returns the keysize, which is 32 (bytes). The Rijndael cipher actually supports keylengths of 16, 24 or 32 bytes, but there is no way to communicate this to 'Crypt::CBC'. * blocksize The blocksize for Rijndael is 16 bytes (128 bits), although the algorithm actually supports any blocksize that is any multiple of our bytes. 128 bits, is however, the AES-specified block size, so this is all we support. * $cipher = Crypt::Rijndael->new( $key [, $mode] ) Create a new 'Crypt::Rijndael' cipher object with the given key (which must be 128, 192 or 256 bits long). The additional '$mode' argument is the encryption mode, either 'MODE_ECB' (electronic codebook mode, the default), 'MODE_CBC' (cipher block chaining, the same that 'Crypt::CBC' does), 'MODE_CFB' (128-bit cipher feedback), 'MODE_OFB' (128-bit output feedback), or 'MODE_CTR' (counter mode). ECB mode is very insecure (read a book on cryptography if you don't know why!), so you should probably use CBC mode. * $cipher->set_iv($iv) This allows you to change the initial value vector used by the chaining modes. It is not relevant for ECB mode. * $cipher->encrypt($data) Encrypt data. The size of '$data' must be a multiple of 'blocksize' (16 bytes), otherwise this function will croak. Apart from that, it can be of (almost) any length. * $cipher->decrypt($data) Decrypts '$data'.
PackageName	perl-Crypt-Rijndael
PackageRelease	lp152.1.1
PackageVersion	1.16
SHA-1	1752E2180403B6B8C3C808544F5D2ABD50F740E1
SHA-256	105AB0502F97AF1C1F138F399CEF7AF19B9B514A4B74027967ED4998BF90B6D3

Key	Value
MD5	C2EC5143DC44A5EDC404C6B6CB3BEF90
PackageArch	x86_64
PackageDescription	This module implements the Rijndael cipher, which has just been selected as the Advanced Encryption Standard. * keysize Returns the keysize, which is 32 (bytes). The Rijndael cipher actually supports keylengths of 16, 24 or 32 bytes, but there is no way to communicate this to 'Crypt::CBC'. * blocksize The blocksize for Rijndael is 16 bytes (128 bits), although the algorithm actually supports any blocksize that is any multiple of our bytes. 128 bits, is however, the AES-specified block size, so this is all we support. * $cipher = Crypt::Rijndael->new( $key [, $mode] ) Create a new 'Crypt::Rijndael' cipher object with the given key (which must be 128, 192 or 256 bits long). The additional '$mode' argument is the encryption mode, either 'MODE_ECB' (electronic codebook mode, the default), 'MODE_CBC' (cipher block chaining, the same that 'Crypt::CBC' does), 'MODE_CFB' (128-bit cipher feedback), 'MODE_OFB' (128-bit output feedback), or 'MODE_CTR' (counter mode). ECB mode is very insecure (read a book on cryptography if you don't know why!), so you should probably use CBC mode. * $cipher->set_iv($iv) This allows you to change the initial value vector used by the chaining modes. It is not relevant for ECB mode. * $cipher->encrypt($data) Encrypt data. The size of '$data' must be a multiple of 'blocksize' (16 bytes), otherwise this function will croak. Apart from that, it can be of (almost) any length. * $cipher->decrypt($data) Decrypts '$data'.
PackageName	perl-Crypt-Rijndael
PackageRelease	41.3
PackageVersion	1.16
SHA-1	248C6DAC5A07A8C267C182027F7B81F87387F5B3
SHA-256	A7C04655E03C9A0D3D1DAA2E8083A496B419A244F2E9AEBE139B826CB28A4D07

Key	Value
MD5	6946CB0A901D8B7DAFBDF2224B576792
PackageArch	armv7hl
PackageDescription	This module implements the Rijndael cipher, which has just been selected as the Advanced Encryption Standard.
PackageMaintainer	umeabot <umeabot>
PackageName	perl-Crypt-Rijndael
PackageRelease	4.mga9
PackageVersion	1.160.0
SHA-1	4929E86BBF723B522E084D321CC46A39462D865E
SHA-256	DB35A9513D121941CC6F77FAC4EAE8F536953D629DE7131F78647CBE4A974500

Key	Value
MD5	88996B33FB5F4A8D102995F86740769D
PackageArch	x86_64
PackageDescription	This module implements the Rijndael cipher, which has just been selected as the Advanced Encryption Standard. * keysize Returns the keysize, which is 32 (bytes). The Rijndael cipher actually supports keylengths of 16, 24 or 32 bytes, but there is no way to communicate this to 'Crypt::CBC'. * blocksize The blocksize for Rijndael is 16 bytes (128 bits), although the algorithm actually supports any blocksize that is any multiple of our bytes. 128 bits, is however, the AES-specified block size, so this is all we support. * $cipher = Crypt::Rijndael->new( $key [, $mode] ) Create a new 'Crypt::Rijndael' cipher object with the given key (which must be 128, 192 or 256 bits long). The additional '$mode' argument is the encryption mode, either 'MODE_ECB' (electronic codebook mode, the default), 'MODE_CBC' (cipher block chaining, the same that 'Crypt::CBC' does), 'MODE_CFB' (128-bit cipher feedback), 'MODE_OFB' (128-bit output feedback), or 'MODE_CTR' (counter mode). ECB mode is very insecure (read a book on cryptography if you don't know why!), so you should probably use CBC mode. * $cipher->set_iv($iv) This allows you to change the initial value vector used by the chaining modes. It is not relevant for ECB mode. * $cipher->encrypt($data) Encrypt data. The size of '$data' must be a multiple of 'blocksize' (16 bytes), otherwise this function will croak. Apart from that, it can be of (almost) any length. * $cipher->decrypt($data) Decrypts '$data'.
PackageName	perl-Crypt-Rijndael
PackageRelease	40.1
PackageVersion	1.16
SHA-1	4FF4D8D5BAF6C7AAE00574DB22F0F2D959341438
SHA-256	A6E24E6A533B95624D30B7E850ADB3211F43D522FEF3BB0C3873F324B21A4273

Key	Value
MD5	012037ACC18778AE3BCCA7A9920BF014
PackageArch	x86_64
PackageDescription	This module implements the Rijndael cipher, which has just been selected as the Advanced Encryption Standard. * keysize Returns the keysize, which is 32 (bytes). The Rijndael cipher actually supports keylengths of 16, 24 or 32 bytes, but there is no way to communicate this to 'Crypt::CBC'. * blocksize The blocksize for Rijndael is 16 bytes (128 bits), although the algorithm actually supports any blocksize that is any multiple of our bytes. 128 bits, is however, the AES-specified block size, so this is all we support. * $cipher = Crypt::Rijndael->new( $key [, $mode] ) Create a new 'Crypt::Rijndael' cipher object with the given key (which must be 128, 192 or 256 bits long). The additional '$mode' argument is the encryption mode, either 'MODE_ECB' (electronic codebook mode, the default), 'MODE_CBC' (cipher block chaining, the same that 'Crypt::CBC' does), 'MODE_CFB' (128-bit cipher feedback), 'MODE_OFB' (128-bit output feedback), or 'MODE_CTR' (counter mode). ECB mode is very insecure (read a book on cryptography if you don't know why!), so you should probably use CBC mode. * $cipher->set_iv($iv) This allows you to change the initial value vector used by the chaining modes. It is not relevant for ECB mode. * $cipher->encrypt($data) Encrypt data. The size of '$data' must be a multiple of 'blocksize' (16 bytes), otherwise this function will croak. Apart from that, it can be of (almost) any length. * $cipher->decrypt($data) Decrypts '$data'.
PackageName	perl-Crypt-Rijndael
PackageRelease	1.18
PackageVersion	1.16
SHA-1	577E709FA4E06566529BF109F73A692290566BF0
SHA-256	D81D6201C4B323C0652B88D21C711BD030593E255B329AAAD69580CBAAD01144

Key	Value
MD5	FE7C005757BF73D2381FCA3A899975A3
PackageArch	x86_64
PackageDescription	This module implements the Rijndael cipher, which has just been selected as the Advanced Encryption Standard. * keysize Returns the keysize, which is 32 (bytes). The Rijndael cipher actually supports keylengths of 16, 24 or 32 bytes, but there is no way to communicate this to 'Crypt::CBC'. * blocksize The blocksize for Rijndael is 16 bytes (128 bits), although the algorithm actually supports any blocksize that is any multiple of our bytes. 128 bits, is however, the AES-specified block size, so this is all we support. * $cipher = Crypt::Rijndael->new( $key [, $mode] ) Create a new 'Crypt::Rijndael' cipher object with the given key (which must be 128, 192 or 256 bits long). The additional '$mode' argument is the encryption mode, either 'MODE_ECB' (electronic codebook mode, the default), 'MODE_CBC' (cipher block chaining, the same that 'Crypt::CBC' does), 'MODE_CFB' (128-bit cipher feedback), 'MODE_OFB' (128-bit output feedback), or 'MODE_CTR' (counter mode). ECB mode is very insecure (read a book on cryptography if you don't know why!), so you should probably use CBC mode. * $cipher->set_iv($iv) This allows you to change the initial value vector used by the chaining modes. It is not relevant for ECB mode. * $cipher->encrypt($data) Encrypt data. The size of '$data' must be a multiple of 'blocksize' (16 bytes), otherwise this function will croak. Apart from that, it can be of (almost) any length. * $cipher->decrypt($data) Decrypts '$data'.
PackageName	perl-Crypt-Rijndael
PackageRelease	lp152.40.1
PackageVersion	1.16
SHA-1	689A3BC85103D151EE68406BF14F1AF801F1E8DF
SHA-256	602B6979282BDA94C0390ACF8E0731606EB54305A8499E86740081355E1DE623

Key	Value
MD5	092706154D040326122D03EAE50AD944
PackageArch	x86_64
PackageDescription	This module implements the Rijndael cipher, which has just been selected as the Advanced Encryption Standard. * keysize Returns the keysize, which is 32 (bytes). The Rijndael cipher actually supports keylengths of 16, 24 or 32 bytes, but there is no way to communicate this to 'Crypt::CBC'. * blocksize The blocksize for Rijndael is 16 bytes (128 bits), although the algorithm actually supports any blocksize that is any multiple of our bytes. 128 bits, is however, the AES-specified block size, so this is all we support. * $cipher = Crypt::Rijndael->new( $key [, $mode] ) Create a new 'Crypt::Rijndael' cipher object with the given key (which must be 128, 192 or 256 bits long). The additional '$mode' argument is the encryption mode, either 'MODE_ECB' (electronic codebook mode, the default), 'MODE_CBC' (cipher block chaining, the same that 'Crypt::CBC' does), 'MODE_CFB' (128-bit cipher feedback), 'MODE_OFB' (128-bit output feedback), or 'MODE_CTR' (counter mode). ECB mode is very insecure (read a book on cryptography if you don't know why!), so you should probably use CBC mode. * $cipher->set_iv($iv) This allows you to change the initial value vector used by the chaining modes. It is not relevant for ECB mode. * $cipher->encrypt($data) Encrypt data. The size of '$data' must be a multiple of 'blocksize' (16 bytes), otherwise this function will croak. Apart from that, it can be of (almost) any length. * $cipher->decrypt($data) Decrypts '$data'.
PackageName	perl-Crypt-Rijndael
PackageRelease	lp151.1.1
PackageVersion	1.16
SHA-1	76C6535A7F49AE3EFDAFB46D8F025DCE76B608F7
SHA-256	577EC3D119C5116EDE93A646CC1A341937F7BA168414F3222892976B75AF1E52

Key	Value
MD5	EA7E1E5FF38BB938F0AA71E3D4F0EF0D
PackageArch	x86_64
PackageDescription	This module implements the Rijndael cipher, which has just been selected as the Advanced Encryption Standard. * keysize Returns the keysize, which is 32 (bytes). The Rijndael cipher actually supports keylengths of 16, 24 or 32 bytes, but there is no way to communicate this to 'Crypt::CBC'. * blocksize The blocksize for Rijndael is 16 bytes (128 bits), although the algorithm actually supports any blocksize that is any multiple of our bytes. 128 bits, is however, the AES-specified block size, so this is all we support. * $cipher = Crypt::Rijndael->new( $key [, $mode] ) Create a new 'Crypt::Rijndael' cipher object with the given key (which must be 128, 192 or 256 bits long). The additional '$mode' argument is the encryption mode, either 'MODE_ECB' (electronic codebook mode, the default), 'MODE_CBC' (cipher block chaining, the same that 'Crypt::CBC' does), 'MODE_CFB' (128-bit cipher feedback), 'MODE_OFB' (128-bit output feedback), or 'MODE_CTR' (counter mode). ECB mode is very insecure (read a book on cryptography if you don't know why!), so you should probably use CBC mode. * $cipher->set_iv($iv) This allows you to change the initial value vector used by the chaining modes. It is not relevant for ECB mode. * $cipher->encrypt($data) Encrypt data. The size of '$data' must be a multiple of 'blocksize' (16 bytes), otherwise this function will croak. Apart from that, it can be of (almost) any length. * $cipher->decrypt($data) Decrypts '$data'.
PackageName	perl-Crypt-Rijndael
PackageRelease	lp151.40.1
PackageVersion	1.16
SHA-1	7E6943C7F70A66889BBACDF1C093F61F80D46B47
SHA-256	3F549394C3B3EFD8C843FC0AA303E76CF140EAE62DDBCAD77437CB3E8FFA9080

Key	Value
MD5	AF59A6DA2BC475378797623776015534
PackageArch	x86_64
PackageDescription	This module implements the Rijndael cipher, which has just been selected as the Advanced Encryption Standard. * keysize Returns the keysize, which is 32 (bytes). The Rijndael cipher actually supports keylengths of 16, 24 or 32 bytes, but there is no way to communicate this to 'Crypt::CBC'. * blocksize The blocksize for Rijndael is 16 bytes (128 bits), although the algorithm actually supports any blocksize that is any multiple of our bytes. 128 bits, is however, the AES-specified block size, so this is all we support. * $cipher = Crypt::Rijndael->new( $key [, $mode] ) Create a new 'Crypt::Rijndael' cipher object with the given key (which must be 128, 192 or 256 bits long). The additional '$mode' argument is the encryption mode, either 'MODE_ECB' (electronic codebook mode, the default), 'MODE_CBC' (cipher block chaining, the same that 'Crypt::CBC' does), 'MODE_CFB' (128-bit cipher feedback), 'MODE_OFB' (128-bit output feedback), or 'MODE_CTR' (counter mode). ECB mode is very insecure (read a book on cryptography if you don't know why!), so you should probably use CBC mode. * $cipher->set_iv($iv) This allows you to change the initial value vector used by the chaining modes. It is not relevant for ECB mode. * $cipher->encrypt($data) Encrypt data. The size of '$data' must be a multiple of 'blocksize' (16 bytes), otherwise this function will croak. Apart from that, it can be of (almost) any length. * $cipher->decrypt($data) Decrypts '$data'.
PackageName	perl-Crypt-Rijndael
PackageRelease	41.3
PackageVersion	1.16
SHA-1	7FED3B0F021026FE670B807003044A0B0538B621
SHA-256	2A6869D57241117550305E0CD4FAB3A25F0D3A693CE83DB262FA452A8EB131B8